I had a couple of damages that were caused during shipping from the UK to US but Steve sent me a partial refund and made it right.
Pads were for my sons mountain bike. Pads he had were the twin ones which were rubbish. Changed ti 4 single pads. What a difference. Stops on a sixpence and being thicker has less lever travel. Really good product.
These mt5's were an upgrade from mt4 which came with my ebike 4 years ago.
First thing to say was Stag fulfilled my order in less than 48 hours. Great service at an amazing price.
The rotors supplied with bike were Magura storm 180 at the rear, 203 front. I decided to upgrade the rotors to MDR-c which have been designed for ebikes. I put 203 on both front and rear, the rear requiring an adapter. Installation of the calipers was very straightforward. The hoses did need trimming, but, the kit comes with all parts needed to complete, comprehensive instructions and Magura have lots of videos on their website.
Now I thought my original levers came with bog standard blades, but compared to the blades supplied with the MT5 (some form of reinforced plastic), it was obvious they were not. Infact they are Magura HC aluminium one finger blades which I was now used to. I swapped them out to the mt5's. One more thing was before connecting hoses I installed Magura 40' banjo adapters which allows you to have shorter hoses, also it gives a neater finish and there is adjustment to give the hoses direction.
Now the bleeding of brakes. Because I knew that the hoses were to be cut, I drew the oil out of both brakes with a small adapter and syringe. No spillage. Everyone seems to complain about how messy a bleed is, but if you leave the plunger in the syringe attached to leaver and use adapter, pipe and clip with syringe on the caliper, the system is constantly under pressure when caliper syringe is depressed. The lever syringe plunger will move when caliper syringe is pressed. 20mls of royal blood per caliper. Just some kitchen towel ready when syringes are removed.
On first ride after fitting followed the magura bedding process on a long hill. With each 1 second pull I could feel the bite getting better.
From reviews I was wary of locking the system, but there is so much positive feel to the brakes. Also the upgraded rotors give more stopping power and are more quiet, the vibration/resonance that the storms generate is gone.
I have to say that I wish I hadn't waited 4 years for this upgrade, I am more confident about the stopping power of MT5 and the HC blades means that the same feel is there.
Bigger is definitely Better.
Came quick not a long wait at all. Man handle it a bit ... much thicker than the stock bash plate.
Don’t really sit nice on frame an they could of been bit bigger to cover the frame wa gets scratched
I have tried a few pairs of Galfer pads now on the e-mtb. These are no exception excellent stopping power and one of the best if tried over the past few years 👍🏻
Very fast delivery 1-2 days to reach Wales👍, found it tough to install onto rear holes using instructions but screwed it into both holes by undoing both footpegs rests❤️👊🏼👊🏼
Could be a little longer on bottom, apart from that it’s very strong and you know your motor is safe!! Very fast delivery thanks Stag moto🤙🤙🤙
Stag has gone above and beyond for us and their product is bar none with quality and performance.
Delivery was nice and quick, product is exactly what I wanted.
Very good service would highly recommend