Sticker Kit Talaria Sting R

Looking to change the colour of your Sting R.

OEM sticker kit for Talaria Sting R

Sticker Application tips:

1. Ideal Temperature Range: For optimal results, ensure that the installation takes place within the following temperature range:

   • Minimum: Above 50°F (10°C)
   • Maximum: Below 90°F (32°C) Maintaining the appropriate temperature is essential for the adhesive to bond effectively.

2. Surface Preparation: Before applying your decal, thorough surface preparation is vital. Clean the application surface meticulously to remove any contaminants such as dirt, dust, grease, or other debris. Here's how to do it:

   • Use a clean, lint-free cloth or paper towels to wipe the surface.
   • If necessary, use a mild detergent and water solution to remove stubborn contaminants.
   • Ensure the surface is completely dry before proceeding with the installation.

3. Step-by-Step Application: When applying your decal, follow these steps to ensure a smooth and bubble-free installation: a. Start in one corner or on one side of the decal. b. Slowly peel the backing away from the decal as you work your way out from the starting point. c. Avoid placing the entire decal at once, as this can lead to the formation of large air bubbles.

4. Dealing with Air Bubbles: It's normal to encounter small air bubbles during the installation process. These can often be worked out over time. Here's how to address them:

   • Use a squeegee to gently press out any small or minor air bubbles.
   • Most small air bubbles will dissipate within 24 hours as the adhesive cures and the decal settles.

5. Preventing Scratches: To prevent scratch marks from the squeegee during installation, take the following precautions:

   • Place the removed backing paper between the squeegee and the decal. This acts as a protective liner.

6. Positioning and Accuracy: To ensure precise placement of your decal, consider these tips:

   • On applicable surfaces, you can use a dry erase marker or masking tape to mark reference points, ensuring better positioning.
   • Measure and mark the desired location for the decal to achieve accurate placement.